Blue Star Elevators

Aristocrat Series

Aristocrat Series of Elevators uses the newly developed PU Coated Steel Belts which last longer than conventional Steel Wire Ropes. The Elevators in this series are built for efficiency and better traveling experience.

The Aristocrat series is equipped with latest available technology for Low and Mid Rise Buildings; it delivers excellent performance thanks to the highly efficient gearless Machine. This Series come equipped with Blue Eye, Remote Monitoring Software which helps us provide you best service.

This Series can also be used for Machine Roomless Application.

Suitable for

Height : Upto 45M (G+15)

Travel Speeds : 0.65Mps / 1.00 Mps

Carrying Capacity : Upto 1800 Kgs / 26 persons

Features

We use precision made High Torque PMSM gearless traction machines. These Machines are highly efficient and consumes less Power as compared to Geared machines. The Gearless machines have been modified with crowned pulleys for using Belts instead of traditional wire rope. These machines are Sealed and do not require Oil Change.

Blue Belt, PU Coated Steel Belt

The PU Coated steel belts in this Elevator replace the traditional Wire Rope. The PU coating is Robust and at the same time allows for a much lesser bending radius. Hence the sheaves can be as small as 100mm in diameter. These Belts are as much as 20 percent lighter than conventional wire ropes and still last as much as two times as compared to wire ropes. Also, as there is no Metal on Metal contact between the Rope and the Pulley in this Elevator, it results in better ride Quality.

The Regenerative drive generates energy instead of heating the braking resistor during the slowing and the stopping of the Elevator. This unit makes clean power with very low harmonic distortion. This Power can be used by other elevators or electrical equipment. Thus resulting in energy saving of upto 50%.

With Blue Eye, Remote monitoring system in place we can monitor the activities of the elevators. This system allows us to provide you prompt service.

The Full Collective Control Panel uses logic to collect the Passenger while travelling in both the directions thereby reducing power consumption and waiting time. The Controller along with VVVF Drives reduces power consumption and also saves time.

The Doors in this Elevator are Power Operated. For Passenger safety, Doors are fitted with Full length Infrared sensors to prevent any person from getting stuck between the doors of the Elevator. With this sensor the Doors return to open position when it senses any obstruction.

Auto Rescue Device

Auto Rescue Device brings the Passengers to the nearest landing in case of power failure, this makes sure that no passenger is stuck in the lift in the event of power failure. ARD is a standard feature in this Series of Elevator.

Overload Indicator

The overload indicator in the Elevator warns the passenger in case the lift has been overloaded. This system works together with the Controller to prevent lift equipment by indicating that the lift has been overloaded and will not take any calls unless the payload is within the capacity of the Elevator.

Modern Fittings

This Series of Elevator is fitted with Flat Panel LED lights in the Cabin, Modern Push Buttons, LCD for Direction and Position Indicators.